Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Encino
Gate repair in Encino usually runs $180-$340 for common fixes like hinge replacements and realignment, while automatic gate operator work on hillside estates off Ventura Blvd typically costs $450-$1,200 depending on whether you need a board swap or a full operator upsizing. Most repairs in Encino can be scheduled same-week, and we answer the phone 24 hours a day. Call (760) 361-6706 and you’ll get Hal or someone from his crew, not a queue.
We know Encino’s gates because we’ve worked on them for years. The heavy wrought-iron driveway gates north of Ventura, the 1960s ranch houses that got retrofitted with slide gates in the 1980s, the new spec homes going up on the valley floor. Different gates, different failures. Same fix: someone who shows up, diagnoses it straight, and welds it right in your driveway instead of hauling it off.
Why Gatewood Fence & Gate Is Encino’s Preferred Gate Repair Company
Hal Gatewood has been fixing gates since 2001, and his name is on the shop. That’s not marketing. When a 1990s estate off Hayvenhurst has a gate seize at 7 a.m. on a Monday, the person who answers the phone is the same person who owns the company. The address is published. The license number is published. There’s nowhere to hide, and that’s exactly how we want it.
Encino customers call us for a specific reason: we fix what’s there. We repair first, replace only when replacement is actually cheaper than nursing a 35-year-old operator through another Valley summer. Our Gate Repair team welds on site. A sagging gate gets a new hinge post and a realignment, not a sales pitch for a full system. The 90-Day Done Right Promise is in writing on every job. If it’s not right, one call brings Hal back. No runaround.
We also know the terrain. Encino isn’t one town with one kind of gate. It’s steep hillside estates off Hayvenhurst and White Oak where gates fight gravity, and flat 1950s ranch lots off Burbank Blvd where slide gates bake in direct sun. That local knowledge means we diagnose faster, stock the right parts, and don’t waste your time or your money.
Our Gate Repair Services in Encino
Electric Gate Repair
Electric gate repair in Encino most often means a motor that won’t start, a gate that stops mid-cycle, or a control board that’s gone dark. On hillside properties north of Ventura, we regularly see motor burnout from undersized operators fighting grade in 110°F heat. We test the full circuit, check the safety sensors, and replace what’s actually failed. Not the whole system, unless the whole system is the problem.
Automatic Gate Repair
Automatic gates in Encino take abuse from two directions: relentless summer heat and Santa Ana winds that rack frames and blow debris into slide tracks. We service LiftMaster, FAAC, BFT, and Mighty Mule operators, and we stock common boards and sensors so we’re not waiting on a part from a distributor while your gate sits open. On hillside installs, we upgrade to torque-rated operators when the original unit was undersized from day one.
Hinge & Post Repair
Here’s the thing most gate companies won’t tell you: a gate sags in the hinge post, not in the middle. If you fix the panel without the post, you’ll fix it twice. In Encino’s older estates, we see steel posts corroded from decades of irrigation runoff, and hinges that were never sized for a 400-pound wrought-iron gate. We cut out the failed section, weld in new steel, and set the gate so it closes true the first time.
Gate Realignment
Gates in Encino go out of alignment for a reason. Hillside lots shift. Posts lean. Powder-coated aluminum panels warp after enough summer heat cycles, and then they bind in the track. We don’t just shim and call it done. We find why the gate moved, fix the underlying cause, then realign it so the operator isn’t fighting the gate on every cycle.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Encino
We’re certified to service nine major gate brands, including LiftMaster, FAAC, BFT, and Mighty Mule. That matters in Encino because so many homes north of Ventura still run on legacy FAAC and BFT operators from the 1980s and 90s. Those boards were never designed to accept modern safety photocells, and after three decades of Valley heat, the boards fail. We stock common parts for Encino customers and can usually have your gate running the same week, even when we’re retrofitting a system that’s older than the truck we drove to your house.
Common Gate Repair Problems We See in Encino Homes
- Motor burnout on hillside swing gates. Undersized 1980s operators fighting grade and 110°F heat burn out windings and circuit boards faster in Encino than anywhere else in LA. The fix is usually a higher-torque operator rated for sloped installations, not another identical unit that will fail again in three years.
- Warped slide gate panels binding in tracks. Summer heat cycles warp powder-coated aluminum, and then the gate can’t slide without grinding. We can often relieve the track and realign, but on badly warped panels, replacement is the cheaper long-term answer.
- Obsolete control boards that can’t accept safety sensors. Legacy DoorKing and BFT systems from the 1990s often lack the wiring for modern UL 325 photoelectric sensors. On some boards we can retrofit; on others, the board has to go.
- Hinge post corrosion from irrigation overspray. Encino’s older estates run sprinklers near gate posts, and steel in constant moisture rots from the inside. You won’t see it until the gate drops an inch. Then it’s a welding job, not a hardware-store hinge swap.
Pricing for Gate Repair in Encino, CA
Gate repair pricing in Encino starts around $180 for hinge and realignment work on smaller gates. Automatic gate operator repairs generally run $450-$1,200, with motor replacements on hillside torque-rated installs at the higher end. Slide gate track repair and panel realignment costs $250-$600. Full operator upsizing for a heavy hillside swing gate can reach $1,500-$2,200 when the original unit was undersized. Every price is quoted and agreed before any work starts. No trip charge inside the county, $40 off any repair over $200, and a permanent 10% discount for seniors and veterans. Call (760) 361-6706 for a free estimate. We price it, we shake on it, and that’s the number on the invoice.
We Also Serve Cities Near Encino
If you’re in Tarzana, Reseda, Sherman Oaks, or Van Nuys, we’re already working in your neighborhood. Encino is central to our Valley service area, and the drive from the shop is short. Same service, same warranty, same live person on the phone. Call (760) 361-6706 and we’ll schedule a time that works.
Serving Encino, CA - Our Local Coverage Area
We’re based in the Encino area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Encino
Your motor is probably undersized for the grade, and the Valley heat is cooking it. North of Ventura, many gates were installed in the 1980s with operators rated for flat lots, not a 15% slope pulling a 400-pound gate. Every cycle the motor works harder than it was designed to, and when it’s 110°F outside, the windings degrade faster. The permanent fix is a higher-torque operator rated for sloped installations. A like-for-like replacement will just fail again on the same schedule. Call (760) 361-6706 and we’ll measure the gate and the grade before we quote anything.
Sometimes yes, sometimes no. If your control board has aux inputs for safety devices, we can wire in UL 325 photoelectric sensors and edge sensors. If the board is a sealed legacy unit from the early 90s, there’s nowhere to land the wires, and the board has to be replaced. We’ll tell you which one you have when we open the panel. The estimate is free, and you’ll know the answer before any money changes hands.
Probably not. Sag usually means a failed hinge post or worn hinge bearings, not a bad gate. On Encino hillside lots, the uphill hinge post takes constant lateral load, and if it’s corroded or undersized, the gate drops. We cut out the bad section, weld in new steel, and realign the gate. A new gate won’t fix a bad post. Fix the post and you’ll fix it once.
Because your track is a wind tunnel. Santa Ana events blow leaves, dust, and gravel across the Valley floor, and a ground-level slide track catches all of it. If debris is binding the rollers, you can clean the track yourself, but if the gate is already slightly misaligned, the debris is finding every gap. We can realign the gate, check the rollers, and install brush seals that keep most of the material out. Call (760) 361-6706 for an exact quote on your setup.
Look for photoelectric sensors on both sides of the gate opening and edge sensors on the leading edges. If you don’t see them, your system doesn’t meet UL 325, and that’s a safety issue, not a paperwork issue. A gate that can’t detect a person or a car in its path can hurt someone. We inspect entrapment protection on every automatic gate repair in Encino, and we’ll bring any legacy system up to code before we call the job done.
Get Your Encino Gate Fixed Today
If your gate is stuck, sagging, grinding, or just woken up dead, call (760) 361-6706. Hal or a member of his crew will answer. We’ll schedule a time, show up when we say we will, and give you a price before we turn a single wrench. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Encino since 2001.