Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterTrusted Gate Motor & Opener for Granada Hills Homeowners
When your gate motor starts grinding, hesitating, or refuses to move at all, the whole rhythm of your Granada Hills home gets thrown off. We’ve been repairing and installing gate motors and openers across Granada Hills since 2001, and most motor failures we see are fixable the same day we show up. Hal Gatewood owns this shop, answers the phone, and stands behind every repair with a 90-Day Done Right Promise in writing. Call Gatewood Fence & Gate at (760) 361-6706 and you’ll get a live person, not a recording.
We’re the local gate company Granada Hills homeowners call when the previous guy either swapped a good board, wired around the safety eyes, or left a motor that worked for two weeks and quit. Hal has been fixing gates since 2001 and gets genuinely irritated by sloppy work. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Key takeaways:
- Same-day gate motor repair in Granada Hills, with a live person answering 24/7
- 90-Day Done Right Promise in writing on every job, repair or installation
- We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule
- Free estimates, no trip charge inside the county, and upfront pricing agreed before any work starts
What Our Gate Motor & Opener Service Includes
Gate motors and openers cover a lot of ground: the motor itself, the control board, the limit switches, the safety sensors, the receiver that talks to your remote, and the wiring that ties all of it together. We handle every part of that system so you’re not stuck coordinating three different companies. Here’s what falls under our Gate Motor & Opener in Granada Hills:
Motor Installation
A new gate motor installation means matching the motor to the weight and length of your gate, the slope of the driveway, and how many times a day that gate cycles. We install motors on new gates and we replace underpowered or dead motors on existing gates. Hal sizes the motor for the actual load, not the salesman’s number on the box, and every installation gets the same 90-Day Done Right Promise.
Motor Repair
Most gate motors in Granada Hills don’t need replacing. They need a capacitor, a limit switch, a receiver board, or a gear that has worn out from years of sun and use. We diagnose the actual fault first, show you what we found, and give you a price before we turn a wrench. If it’s repairable, we repair it on site. A gate motor repair here usually takes an afternoon, and we don’t swap parts that don’t need swapping.
Linear Motor
Linear motors are the most common opener style on sliding gates in Granada Hills, and Linear is also the brand name of a major opener line we service. The arm moves in a straight line to push or pull the gate along its track. We stock common Linear components and we’re certified to work on Linear systems. If your linear motor has lost its limits or is straining to move the gate, that’s a call we get several times a week.
Slide Motor
Slide motors handle gates that roll on a track, and the motor is usually mounted on a concrete pad near the gate post. The motor drives a gear that engages a chain or rack mounted to the gate. We align the rack, set the limits properly, and make sure the rollers and guide wheels aren’t fighting the motor. A slide gate that binds because the post settled can burn out a new motor in under two years, and fixing the alignment before it kills the motor is something we check on every slide motor call near our Gate Motor & Opener in Northridge and throughout Granada Hills.
Intercom Integration
If your gate has an intercom, a keypad, or a telephone entry system, it has to talk to the gate motor. We wire intercom systems into gate openers so the release button actually releases, the call reaches the house, and the gate opens when it’s supposed to. We work with existing intercom panels and new installs. When someone tells us the intercom works but the gate won’t open, it’s usually the relay wiring between the panel and the control board, and that’s exactly the kind of thing we trace and fix.
Battery Backup
Battery backup keeps your gate operational during a power outage, which matters more in Granada Hills than most people think: the wind that takes down power lines here also means your gate stays shut when you need to get out. We install battery backup systems on existing gate motors and wire them so they charge automatically. We also test existing battery backups because the batteries themselves age out every few years, and a dead backup battery gives you false confidence.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Gate Motor & Opener
We’re certified to service nine major gate motor brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That certification isn’t a decal. It means Hal has torn these units apart, knows their failure points, and can get parts without waiting on a distributor who doesn’t answer the phone.
We’ve worked on hundreds of FAAC motors across Granada Hills, Tarzana, and Encino, and the most common FAAC failure we see is a capacitor that dies in the heat. BFT units tend to be solid, but their limit switch wiring gets brittle with age and sun. Linear motors are the workhorses of sliding gates near our Gate Motor & Opener in San Fernando, and we stock common Linear components on the truck. Viking openers often get paired with heavy commercial gates, but plenty of Granada Hills homeowners have them too, and we service those as well. Whether you have one of those or any other make, we can help. Bring us the brand and the symptom and we’ll take it from there.
Signs You Need Gate Motor & Opener Right Now
- Your gate stops halfway and reverses. This usually means an obstruction sensor is misaligned or the force settings are out of whack. It’s also a sign someone adjusted the motor and made a small problem worse. Left unfixed, a gate that reverses mid-cycle can wear out the gearset fast.
- You hear a humming noise but the gate doesn’t move. That’s often a capacitor or a seized gear. The motor is getting power but can’t turn. With a seized gear, running it repeatedly scores the gear teeth and turns a repair into a replacement.
- The gate opens but won’t close on its own. In Granada Hills, this is frequently a photo eye that got knocked out of alignment, a limit switch that’s failed, or a transmitter that’s lost its programming. Show us the gate closing on its own and we’ll show you where it’s failing. A gate that won’t close is a security problem and we treat it like one.
- Your remote only works from a few feet away. That can mean transmitter battery, receiver board, or interference from a neighbor’s system. We can test the receiver and narrow it down in about ten minutes. The fix is usually a lot cheaper than the new motor somebody else quoted you.
- The motor sounds different than it did last month. Grinding, clicking, or laboring noises mean something mechanical is changing. That’s the moment to call, not the moment after the gate gets stuck open with a car on the wrong side of it. We’d rather catch a failing limit switch on a Tuesday than a dead motor on a Sunday evening.
If any of that sounds familiar, call (760) 361-6706. A live person answers, and they’ll ask you what the gate is doing, not put you on hold.
Our Gate Motor & Opener Process - Step by Step
- 1
You call and talk to a person. You call (760) 361-6706 and a live human answers, around the clock. We ask what the gate is doing, what brand it is if you know, and how long the problem has been going on. Then we schedule a window we’ll actually show up in.
- 2
We show up and diagnose on site. Hal or his crew arrives in a marked truck, puts eyes on the gate, and starts testing. We check power to the motor, test the capacitor, cycle the limits, inspect the rack and rollers, and look at the wiring. The diagnostic is about finding the actual fault, not building a case for a new motor.
- 3
We quote the repair in plain English. Before any work starts, you get a price. Not an estimate with wiggle room, not a range that grows at the door. The price is quoted and agreed before we turn a wrench. If it’s a repair, we tell you what’s wrong, what it costs to fix, and how long it’ll last. If the motor is truly dead, we tell you what a new one costs installed, with the same 90-Day Done Right Promise.
- 4
We fix the gate, and you watch if you want. We repair the motor or opener on site. Hal welds on site too, so a cracked motor mount or a bent rack doesn’t mean a truck to the shop and a hole in your driveway for two weeks. We show you what we did, test the gate through full open and close cycles, and make sure the safety eyes actually stop the gate.
- 5
You get the 90-Day Done Right Promise. Every job carries our 90-Day Done Right Promise in writing. If it’s not done right, we make it right. One call brings us back, no runaround, no “well, that’s a new problem” story. Hal Gatewood’s name is on the invoice.
How Much Does Gate Motor & Opener Cost in Granada Hills?
Our Gate Motor & Opener cost guide shows that repair in Granada Hills typically runs $180 to $340 for common failures like capacitors, limit switches, receiver boards, and photo-eye alignment. A full motor replacement on a sliding gate usually lands between $1,200 and $3,500 installed, depending on the weight of the gate, the motor brand, and whether you need a new rack or track work. A battery backup install is generally $600 to $1,200. A basic intercom integration into an existing gate motor starts around $300 to $800.
What moves the price:
- Whether the gate is sliding or swinging, and how heavy it is
- The brand and age of the motor, and whether parts are on hand or special order
- Condition of the track, rollers, hinges, and rack - a motor working against a sagging gate will fail again
- Whether you need accessory wiring like intercom, keypad, or battery backup
A gate sags in the hinge post, not in the middle, and that’s where we start. A shop that quotes you a new motor without checking the post and the track is selling you a part, not a fix. That’s how homeowners end up paying twice. Our free estimate covers the whole system, not just the motor. You get the price before any work starts, and the price you’re quoted is the price you’ll pay. There’s a permanent 10% discount for seniors and veterans, $40 off any repair over $200, and a free second opinion on any written estimate you’ve gotten from another company.
For an exact quote on your gate motor and opener in Granada Hills, call (760) 361-6706. Estimates are free and there’s no trip charge inside the county.
Gate Motor & Opener Near Granada Hills - Our Service Area
We work all over the Granada Hills area and the surrounding San Fernando Valley. That includes gate motor and opener service in Sherman Oaks, Van Nuys gate motor repair, Tarzana, Encino, Northridge, San Fernando, North Hollywood, Reseda, Sylmar, Panorama City, and Chatsworth. If you’re inside the county, there’s no trip charge. Most repair calls in Granada Hills get same-day service, and Hal will give you a straight answer on when we can be there.
Serving Granada Hills, CA - Our Local Coverage Area
We’re based in the Granada Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Gate Motor & Opener in Granada Hills
A gate motor, also called a gate opener, is the mechanical device that opens and closes your gate automatically, driven by an electric motor controlled by a circuit board and activated by a remote, keypad, or intercom. For sliding gates in Granada Hills, the motor usually drives a gear against a rack on the gate. For swing gates, it moves an arm or an actuator. The “opener” includes the motor, the control board, the safety sensors, and the receiver that talks to your remote. We repair and install the entire system, not just the motor bolted to the pad.
Most gate motor repairs in Granada Hills are done the same day we show up. A capacitor replacement takes under an hour. A limit switch or receiver board swap runs an hour to two. A full motor replacement can take three to five hours, including setting the limits and testing the safety sensors. Hal keeps common parts on the truck so we’re not running back and forth to the shop. Call (760) 361-6706 and we’ll tell you straight what the timeline looks like for your gate.
A typical gate motor repair in Granada Hills costs $180 to $340 for common failures like capacitors, limit switches, receiver boards, and photo-eye alignment. A full motor replacement on a sliding gate usually runs $1,200 to $3,500 installed, depending on the motor size and the condition of the track and rack. You get the exact price before any work begins, and the price we quote is the price you’ll pay. Call (760) 361-6706 for a free estimate.
We’re certified to service nine major brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If you have something else, bring us the brand and the symptom. Between Hal’s warehouse of parts and the relationships he’s built since 2001, there aren’t many gate motors in Granada Hills we can’t get running. If we can’t fix it, we’ll tell you that honestly, which is more than some shops will do.
Yes. A live person answers our phone around the clock, and if your gate is stuck open, stuck closed, or making a noise that means it’s about to die, call (760) 361-6706. We prioritize emergency gate motor calls in Granada Hills and do our level best to get to you the same day. We don’t run a call center or a dispatch queue. The person you talk to is someone who can actually help you.
Every job, repair or installation, carries our 90-Day Done Right Promise in writing. If it’s not done right, we make it right. That’s not fine print, it’s the standing policy at Gatewood Fence & Gate. Hal Gatewood owns the shop and his name is on every invoice. One call brings us back, no runaround.
Clear a path to the gate motor and the gate track so we can work safely. If you have the remote or keypad, have it handy so we can test the receiver. If your gate is powered by a dedicated breaker, know where the panel is. That’s it. You don’t need to “have it diagnosed” or know the model number. We’ll handle the diagnosis when we get there, and you’ll get the price before any work starts. Call (760) 361-6706 to schedule.
Schedule Your Gate Motor & Opener Service in Granada Hills Today
If your gate motor is failing, call (760) 361-6706. A live person answers, 24 hours a day, and we’ll get you on the schedule. The estimate is free, the price is agreed before any work starts, and every job carries the 90-Day Done Right Promise in writing. Hal Gatewood has served Granada Hills since 2001, and he’ll be the one making sure your gate works like it should.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Granada Hills since 2001.