Ghost Controls Gate Motor & Opener Nationwide | Gatewood Fence & Gate

Q: Will a repair void my Ghost Controls warranty?

If your Ghost Controls opener is still under the manufacturer warranty, using an independent service provider does not automatically void it; Ghost Controls warranties cover the parts, not who installs them. We use OEM Ghost Controls parts on warranty-eligible repairs when that's the right call, and we document the work so you can file a warranty claim if needed. For units out of warranty, we use quality aftermarket parts that we stand behind with our own 90-Day Done Right Promise. Call (760) 361-6706 and we'll tell you where your unit stands before you spend a dollar.

Q: How fast can you get to a Ghost Controls gate motor repair in Granada Hills?

Most Ghost Controls door repair calls in Granada Hills are same-day or next-morning, because we keep common Ghost Controls parts on the truck and we answer the phone with a live person 24/7. If you call at 2 a.m. with a gate stuck open, you'll get a person, not a voicemail. Emergency calls for gates that won't close take priority, because an open gate is a security problem. If you're locked out of your driveway with a gate that won't open, we'll get you rolling and then explain what broke.

Q: Do you replace the whole Ghost Controls opener or just the failed part?

We replace the failed part unless the opener is too far gone to justify the repair cost. Most Ghost Controls units fail one component at a time: a board, a switch, a receiver. Repair-first is how we've done business since 2001; we fix the gate in your driveway rather than selling you a new opener because it's easier for us. When replacement is genuinely the better call, we show you the numbers and let you decide. The estimate is free either way.

Q: Are Ghost Controls parts actually available, or is there a long wait?

Common Ghost Controls parts like boards, limit switches, batteries, and receiver modules are available, and we stock the ones that fail most often in Granada Hills heat. For less common parts, we can usually source them within a few days. We don't leave you with a half-finished gate while we wait on a parts truck; if the part has a lead time, we tell you before we start.

Q: How much does Ghost Controls gate motor repair cost in Granada Hills?

Ghost Controls gate motor repair in Granada Hills typically runs between $185 and $520, depending on whether the failed component is a limit switch, a board, or the motor arm itself. You'll get an exact price before we start, and estimates are free. We charge no trip fee inside the county, and there's $40 off any repair over $200. Call (760) 361-6706 and tell us what the gate's doing. We'll tell you what it needs, no runaround.

Ghost Controls Gate Motor & Opener in Granada Hills: What to Know First

Ghost Controls gate motor and opener repair in Granada Hills runs between $185 and $520 for most service calls, depending on whether we’re replacing a control board, a bad limit switch, or the arm assembly itself. We’re an independent Ghost Controls service provider and we typically complete same-visit repairs because our trucks carry the common Ghost Controls parts that fail in this climate: control boards, limit switches, and receiver modules. If you’re hearing the motor hum but the gate won’t move, call (760) 361-6706 and a live person answers. If you’re just starting to research whether it’s worth fixing, keep reading.

Call (760) 361-6706

This page is written for Granada Hills homeowners who own a Ghost Controls gate opener and want straight answers: what breaks, what it costs, and whether it’s smarter to repair or replace. We’ve been fixing Ghost Controls openers in Granada Hills since the brand started showing up on local driveways, and we’ve seen every failure mode these units can offer. Hal Gatewood is the name on the shop, and the shop is down the road.

How Ghost Controls Products Fail - and How We Fix Them

Ghost Controls builds a decent residential opener, but in Granada Hills they fail in predictable ways. Here are the five failures we see most often on service calls, and what we actually do about them.

Control board failure on the AXSP and AXD series. The board sits in a housing that’s supposed to be weather-sealed, but Granada Hills heat bakes the sealant until it cracks, and morning condensation from the fog line on Rinaldi and Balboa gets inside. The board corrodes, the gate opens halfway and stops, or it refuses to respond to the remote. We replace the board with either Ghost Controls OEM when the unit is under warranty, or a quality aftermarket board that’s rated for the same voltage. Our fix includes cleaning the housing and resealing it so the new board doesn’t die the same way in eighteen months.
Limit switch drift on the gate’s travel. Ghost Controls limit switches are contact-style and they wear. Eventually the gate slams at the end of travel or stops six inches short of the post. It’s not a programming issue; the switch is physically worn. We replace both limit switches and set the travel so the gate stops soft. This is one of the most common calls we get in Granada Hills where the gate “used to work fine” and slowly got worse.
Receiver module going deaf. The receiver in the Ghost Controls TSS1 and R series units has a known habit of losing range, especially when it’s mounted inside a metal enclosure or near a stucco wall with wire mesh. The remote only works when you’re practically touching the gate. We test the receiver first, and if it’s weak, we replace the module and re-pair the remotes. Sometimes the fix is as simple as relocating the antenna wire, and we do that before selling anybody parts.
Arm assembly sag on the swing-arm models. Ghost Controls swing arms run on a lead screw, and after a few years in the sun the grease turns to paste. The arm gets noisy, then it bogs down, then it trips the overload. We rebuild the arm with new grease and replace the screw if it’s scored. On broken arms we always ask: did the wind catch the gate, or did the hinge post sag? Gravity doesn’t care about the motor; if the post is leaning, the opener is fighting a losing battle.
Battery backup failure in the BX series. When a homeowner tells us the gate works fine until the power blinks, then the opener goes dead, that’s the battery backup. In Granada Hills, power flickers during heat waves and Santa Ana events, and that’s exactly when the battery gives out. We test the battery under load. A battery that reads 12 volts sitting still can drop to 7 volts under load, which won’t move a gate. We replace the battery and verify the opener runs on backup before we leave.

One thing we won’t do: replace the whole opener when a single component is bad. Ghost Controls parts are available, and a $60 limit switch is always cheaper than a $700 opener. When a unit is genuinely past saving, we’ll tell you that too, and show you the numbers side by side.

Our Ghost Controls Gate Motor & Opener Process

Here’s what happens when you call us about a Ghost Controls opener in Granada Hills, from the first phone call to the last test.

1
You call, a live person answers. You tell us what the gate is doing or not doing. We ask about the model number, the age of the unit, and any noises. That tells us which parts to bring.
2
We show up and do a hands-on diagnostic. Before we quote anything, we test power to the board, check the limit switches, listen to the motor, and watch the gate move. The diagnosis takes about 45 minutes and the estimate is free.
3
We give you the price, and no work starts until you approve it. You’ll know the exact number before we turn a wrench. Not a range, not an estimate, the number you’ll pay. That’s how we’ve operated since 2001.
4
We repair in your driveway, not in a shop. On-site welding and component replacement means your gate stays put. We don’t haul gate openers off to a shop for a week. Most Ghost Controls repairs are done same-day, before our boots leave your driveway.
5
We test the full cycle under load. Open and close, remote range, safety reverse, auto-close (if you have it), and battery backup. If it doesn’t work right in front of you, we’re not done.
6
You get the 90-Day Done Right Promise in writing. If something about the repair isn’t right, call and Hal comes back. No phone tree, no runaround. That guarantee is stamped on the invoice.

What Ghost Controls Gate Motor & Opener Costs in Granada Hills

Here’s what we charge for the Ghost Controls repairs we handle most often in Granada Hills. These are real price ranges, not teaser pricing; your exact quote depends on your model and what we find when we open the housing.

Ghost Controls control board replacement: $180-$340 installed, depending on OEM vs aftermarket board and whether your unit is under warranty.
Limit switch replacement: $120-$210, including travel reset and testing.
Receiver module or antenna fix: $95-$180, including re-pairing remotes.
Arm assembly rebuild: $220-$420, depending on whether the lead screw and bearing need replacement.
Battery backup replacement: $110-$240, tested under load before we hand it back to you.
Full opener replacement (when repair doesn’t make sense): $650-$1,200, installed and programmed with remotes and safety edges.

What moves the price: the age of the unit, whether Ghost Controls parts are still under warranty, and whether the gate itself needs adjustment (a sagging hinge post means the new motor will burn out faster). We don’t charge for the trip inside the county, and there’s $40 off any repair over $200. Seniors and veterans always get 10% off, no need to ask twice. Call (760) 361-6706 for an exact quote; estimates are free.

Why Granada Hills Homeowners Call Gatewood Fence & Gate for Ghost Controls Work

Because we’ve been here since 2001, and because Hal Gatewood grew up not far from the old Granada Hills High School on Zelzah. He knows these neighborhoods the way you only do when you’ve driven them your whole life. When a gate on Woodley fails in July or one on Sesnon starts acting up during a Santa Ana, we know the failure patterns that show up in this specific climate. We’re not reading a script; we’re looking at a problem we’ve solved before, and we tell you straight what it’ll take to fix it right.

Every job carries the 90-Day Done Right Promise in writing. Not “up to” 90 days, not “in most cases.” If it’s not done right, Hal comes back. That’s the deal. We also service the other brands you might have on the property: LiftMaster, Mighty Mule, DoorKing, FAAC, BFT, Linear, Viking, and Elite. If your Ghost Controls opener is beyond saving and you want to switch brands, we’ll give you an honest comparison and do the install. Fix the panel without the post and you’ll fix it twice; that’s the kind of thing we tell you before you spend the money.

FAQs

Will a repair void my Ghost Controls warranty?
+

How fast can you get to a Ghost Controls gate motor repair in Granada Hills?
+

Do you replace the whole Ghost Controls opener or just the failed part?
+

Are Ghost Controls parts actually available, or is there a long wait?
+

How much does Ghost Controls gate motor repair cost in Granada Hills?
+

Contact Gatewood Fence & Gate for Ghost Controls Gate Motor & Opener in Granada Hills

If your Ghost Controls opener is acting up in Granada Hills, call (760) 361-6706 and a live person answers, 24 hours a day. We’ll give you a straight diagnosis over the phone, a free in-person estimate if we need to see it, and a written price before any work starts. Hal Gatewood’s name is on the shop and on every invoice, and he’s been fixing gates around here since 2001. The name is on the shop, and the shop is down the road.

Written by Hal Gatewood, Owner, Gatewood Fence & Gate at Gatewood Fence & Gate, serving Granada Hills and nearby areas.