Ghost Controls Gate Parts & Welding Nationwide | Gatewood Fence & Gate

Ghost Controls Gate Parts & Welding in Granada Hills: What to Know First

Ghost Controls gate parts and on-site welding in Granada Hills run $180 to $380 for most hinge, post, and rail repairs, and we finish most single-gate jobs the same day. We’re an independent Ghost Controls service provider, not a factory shop, so we carry the replacement parts that actually fail on these openers and we weld on site in your driveway instead of hauling your gate off to some shop across the Valley. If your Ghost Controls gate is sagging, stuck, or making a sound it shouldn’t, call (760) 361-6706 and talk to a live person who has been fixing these systems around Granada Hills since 2001.

Call (760) 361-6706

This page is for homeowners in Granada Hills, Northridge, Mission Hills, and the surrounding Valley neighborhoods who own a Ghost Controls automatic gate opener and need parts or welding work done properly. Hal Gatewood’s name is on the shop, the price is agreed before any work starts, and every job carries our 90-Day Done Right Promise in writing.

How Ghost Controls Products Fail - and How We Fix Them

Ghost Controls builds a clever opener, but around Granada Hills the heat and the hills give certain parts a harder time than the manual ever mentions. Here’s what we actually see on service calls.

• Hinge post fatigue on the AXDP and TSS1 series. Ghost Controls dual-swing and heavy single-swing openers put steady load on the hinge side, and in Granada Hills the dry, shifting soil lets concrete posts lean just enough to bind the gate. We weld new hinge brackets or reset the post, then reinforce the connection so the gate swings true. The symptom is a gate that swings fine half a foot and then bogs.
• Rail and roller wear on the SL and RSL slide-gate series. Chain-driven slide gates pick up grit from the Granada Hills wind, and that grit acts like sandpaper on the rollers and rail. You’ll hear a grinding sound at the end of travel. We replace the worn rollers and weld-repair any rail scoring before the chain starts climbing teeth and jumping. A new rail isn’t always the answer, and we’ll tell you when it actually is.
• Bent arm brackets on the KPD and TSS1 kits. The aluminum arms Ghost Controls sends in those kits are light, and a gust coming through the Santa Susana Pass can twist them. The opener then pushes slightly off-axis, which wears the rod end out in weeks. We straighten or weld a heavier bracket and realign the travel, which saves you buying another factory arm that’ll do the same thing next season.
• Latch and lock misalignment after hinge replacement. This is a Ghost Controls-specific frustration we see in Granada Hills often. The opener’s built-in lock works with a specific gap, and once hinges wear, the latch pin no longer lands in the pocket. We weld and shim the latch assembly and set the gap so the lock engages cleanly, instead of leaving you with a gate that closes but doesn’t actually lock.
• OEM limit cam failure on the older AXDP1 board. The original limit cams wear into a groove and the gate starts stopping short or overrunning. Ghost Controls no longer sells that cam separately, so most companies tell you to replace the whole arm. We machine and weld a replacement cam on site for far less, and the opener runs years longer. That’s a repair, not a patch, and it’s under the same 90-day promise.

Our Ghost Controls Gate Parts & Welding Process

When you call about a Ghost Controls gate in Granada Hills, here’s exactly how the job runs from the first phone call to the final test.

1. 1
   You call us. A live person answers at (760) 361-6706, day or night. Hal or the person who shows up asks what the gate is doing, what model opener you have, and what part of town you’re in. Tell me what it’s doing and I’ll tell you what it needs - no runaround.
2. 2
   We inspect the gate and the opener together. Hal shows up and watches the gate cycle. Most Ghost Controls failures announce themselves at the hinge, the rail, or the travel stops. We figure out the real cause before we touch anything.
3. 3
   We talk parts: OEM vs. quality aftermarket. For circuit boards and motor heads, we use Ghost Controls OEM parts to keep your warranty-safe. For steel hinge brackets, rails, and arms, we often use heavier aftermarket stock or weld our own, because the factory versions are frequently the first thing that fails again. We tell you the difference and the cost before we start.
4. 4
   The repair happens in your driveway. Hinges, posts, latches, and rails - we weld on site. Your gate doesn’t leave your property, and you can watch the work happen. If it’s a parts replacement with no welding, we still do it right there.
5. 5
   We cycle the gate 30 times and check the lock. Ghost Controls openers are sensitive to small misalignments, so we test in both directions, under load, with the opener doing the work. If it binds or the lock doesn’t engage, we adjust before we leave.
6. 6
   We hand you the invoice with the 90-Day Done Right Promise. Plain English, no fine print. If it’s not done right, one call brings Hal back.

What Ghost Controls Gate Parts & Welding Costs in Granada Hills

Here’s what we charge for common Ghost Controls gate parts and welding work in Granada Hills. The price you’re quoted is the price you pay, and it’s agreed before we touch a single bolt.

• Hinge replacement, welded on site: $180-$320 per hinge depending on gate weight and post condition.
• Post replacement or reinforcement: $260-$540 including concrete and welding. A sagging gate sags in the hinge post, not in the middle, and that’s where we start.
• Rail repair or resurfacing for slide gates: $160-$290 for scoring repair and roller replacement. A full rail replacement runs higher, and we tell you plainly if you don’t actually need one.
• Latch and lock alignment: $120-$220 including shims or welded tabs.
• Custom welding (brackets, arm repairs, limit cams): $90-$250 depending on the fabrication.

What moves the price is gate weight, post condition, and how far the existing parts have been run after they started failing. Call (760) 361-6706 and we’ll give you a no-hassle quote over the phone and then stand behind it when we show up.

Why Granada Hills Homeowners Call Gatewood Fence & Gate for Ghost Controls Work

Hal Gatewood has been fixing gates around Granada Hills since 2001, and he still shows up when he says he will. We’re the company people call after someone else already made a mess of a Ghost Controls opener - because we’ll tell you straight what went wrong and what it’ll take to fix it right, no upselling and no hauling your gate off to a shop. Our welds are done by a person, not a parts-swapper, and every job carries the 90-Day Done Right Promise in writing. We’re certified to service nine major brands - Ghost Controls, LiftMaster, Mighty Mule, DoorKing, FAAC, BFT, Linear, Viking, and Elite - so if your next call is about a different opener, it’s the same crew. We don’t charge a trip fee inside the county, and we answer the phone at (760) 361-6706 with a live person around the clock. The name is on the shop, and the shop is down the road - that is the oldest accountability there is.

FAQs