Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Van Nuys
A new driveway gate in Van Nuys runs $1,800-$4,200 installed, and a pedestrian gate runs $900-$2,400 depending on the post condition and operator you choose. Most of our Van Nuys installs wrap up in one day once the steel is cut and welded. If you’re off Vanowen, Victory, or Sherman Way, call Hal at (760) 361-6706 and he’ll give you a straight number before anyone touches a tool. We’re local, owner-operated, and we’ve been welding gates in driveways across Van Nuys since 2001, not hauling them off to some shop across the county.
Why Gatewood Fence & Gate Is Van Nuys’s Preferred Gate Installation Company
Van Nuys isn’t Burbank. The heat here is different. Summer asphalt on Van Nuys Boulevard radiates surface temperatures past 150°F, and that cooks gate operators in ways a Sherman Oaks tech rarely deals with. We plan for it. Our Gate Installation team specs motors with higher thermal tolerance and mounts them where air can actually move, not trapped against a black steel post that bakes all afternoon.
When you call us, Hal answers. Not a voicemail, not a chatbot, not a call center three states away. That matters when your gate is stuck open at 7 a.m. and your car is on the wrong side of it. Van Nuys customers get a real person around the clock. It’s been that way for 29 years, and it’s not changing.
We show up in a uniform truck with tools for the job in it. No second trip back to the yard because we didn’t know your post was anchored in a 1962 slab that shifted. We assume it shifted. Van Nuys slabs shift. So we check the post before we ever hang a panel, because fixing a panel on a bad post means fixing it twice. Every Van Nuys install carries our 90-Day Done Right Promise in writing. If it’s not right, one call brings Hal back. That’s it.
Our Gate Installation Services in Van Nuys
Swing Gate Installation in Van Nuys
Most Van Nuys driveways are narrow, and a swing gate is the practical choice unless you’re on a larger lot near the Sepulveda Basin. We weld the hinge brackets to the post, not bolt them on, because a bolted hinge on a heat-warped post is a sag waiting for its first summer. A typical swing gate install in Van Nuys runs $2,200-$4,000 with a new operator, depending on panel width and whether we’re setting new posts or reusing solid ones.
Security Gate Installation in Van Nuys
Van Nuys has a long memory. A large wave of wrought-iron automatic security gates went up across the neighborhood in the early 1990s, and we still install and upgrade those systems today. Modern security gate work means new steel with proper ground clearance for your driveway slope, plus an operator that won’t stall when temps push past 108. If you want a gate that actually protects the property rather than just marking the driveway edge, we build it to close and latch every time.
Driveway Gate Installation in Van Nuys
Driveway gates in Van Nuys have to handle heat that softens gear sets and freezes that stress welds come January. We size the steel accordingly. Powder-coated galvanized steel holds up better here than painted mild steel, and we tell you that up front, with prices for both. Expect $1,800-$4,200 for a single swing driveway gate, installed, with operator. The variance depends on the panel, the post condition, and whether you need a new concrete pad.
Sliding Gate Installation in Van Nuys
Sliding gates make sense on wider lots and commercial properties across Van Nuys, especially where the driveway slopes up from the street and a swing gate would bind. A sliding gate install in Van Nuys typically runs $2,800-$5,500 depending on track length, steel weight, and whether we’re building the panel on site or bringing pre-welded sections. The track is the weak point here, not the motor. Heat expands steel. If the track isn’t level and floating the way it should, the gate drags and the motor labors until it burns. We set tracks right the first time.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Van Nuys
We install and service DoorKing, Elite, LiftMaster, and Mighty Mule operators across Van Nuys. We keep common Van Nuys parts on the truck, especially thermal fuses, gear sets, and control boards for the legacy systems that dominate this neighborhood. If your operator quits on a Tuesday, we don’t want you waiting on a part from a warehouse. We stock for Van Nuys, not for a generic Southern California service map.
Common Gate Installation Problems We See in Van Nuys Homes
- Motor coil failure from Valley heat. An asphalt driveway in Van Nuys can push surface temperatures well above 150°F directly beneath a gate operator. That heat accelerates coil breakdown and melts plastic gear sets on older installations that were never designed for this climate. A new install needs heat-rated components, not whatever was cheapest at the supply house.
- Hinge post corrosion and misalignment. Many Van Nuys gates are anchored into 1950s-1970s concrete slabs that have been shifting for forty years. When a slab moves, the post tilts, the hinge binds, and the gate starts dragging. Fix the panel without fixing the post and you’ll fix it twice. We check the post before anything else.
- Legacy operator parts scarcity. Van Nuys has a huge installed base of DoorKing 1800-series and Elite SL-1000 operators from the early 1990s. Parts for that generation are drying up. We’ll tell you straight when a repair is throwing money at a dying system, and we’ll quote a replacement that fits the existing gate frame if the steel is still sound.
- Warped metal frames from sustained heat. A painted mild steel gate in direct Van Nuys sun can warp enough to bind on the latch side within a few seasons. We spec galvanized or powder-coated steel for this climate, and we tell you why before we sell it.
Pricing for Gate Installation in Van Nuys, CA
Here’s what we quote in Van Nuys right now. A pedestrian gate install runs $900-$2,400. A single swing driveway gate runs $1,800-$4,200. A sliding gate runs $2,800-$5,500. A full security gate with an operator, safety edges, and a loop detector runs $3,500-$7,000 depending on the span and the access control you want. These prices include labor, steel, welding, and the operator. We agree on the price before we start, and that number doesn’t move at the door. No trip charge inside the county. Seniors and veterans get 10% off, every job, no haggling. Call (760) 361-6706 and Hal will give you a written estimate.
We Also Serve Cities Near Van Nuys
Our Van Nuys customers come from across the central Valley, and we cover the surrounding communities too. If you’re in Sherman Oaks, Panorama City, North Hollywood, or Sun Valley, the same crew and the same 90-Day Done Right Promise apply. One call to (760) 361-6706 gets you on the schedule wherever you are in the area.
Serving Van Nuys, CA - Our Local Coverage Area
We’re based in the Van Nuys area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Van Nuys
Van Nuys sits in the San Fernando Valley heat basin, where summer temperatures routinely reach 108-113°F and asphalt driveways radiate heat above 150°F directly beneath gate operators. That sustained thermal load burns out motor coils and degrades plastic gear sets far faster than in foothill or coastal communities. When we install in Van Nuys, we spec motors built for that heat and mount them for airflow, not appearance. Call (760) 361-6706 and we’ll look at what’s on your driveway now.
Galvanized steel with a powder-coated finish. Painted mild steel warps in sustained Valley heat and the temperature swing here, an 80-plus degree seasonal shift, stresses weld joints through repeated expansion and contraction. Stainless steel hinges and fasteners don’t corrode like zinc-plated hardware. It costs more up front and it lasts. Ask us for both prices and we’ll show you the difference in writing.
Because the hardware is reaching end of life at the same time. A large wave of automatic gate installations hit Van Nuys after 1992, and those DoorKing 1800-series and Elite SL-1000 operators are now 30-plus years old. Replacement parts for that generation are getting scarce, and a repair on a 30-year-old board often costs half as much as a new operator that’s easier to live with. We’ll quote both and tell you when a repair is a bad investment.
Yes, but only after we fix the post. A gate sags in the hinge post, not in the middle, and if the post is shifting in an old Van Nuys slab, a new operator won’t fix the drag. We weld and set posts on site, then install the operator once the gate swings clean. Any company that skips that step is selling you a future service call.
Any new automatic gate install in Van Nuys must meet UL 325 safety standards, which means photo eyes or a contact edge plus a force-sensing operator that reverses on obstruction. We install both, tested, before we leave. Call (760) 361-6706 for a free estimate on a compliant install, and we’ll walk you through what’s needed for your specific property.
Call Gatewood Fence & Gate for Your Van Nuys Gate Installation
If you need a gate installed in Van Nuys, and you want the person who answers the phone to also be the person who welds the post, call Hal at (760) 361-6706. We’ll come out, look at your driveway, check your slab, and give you a written price that doesn’t change at the door. No pressure, no upsell. Just a gate that closes when it’s supposed to, in a neighborhood where that matters.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Van Nuys since 2001.