Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair Services in Tarzana, CA
A gate that won’t open in Tarzana isn’t just annoying - it can trap your car in the driveway when you’re already late, or leave your property open overnight along a street where that actually matters. Most calls we get from this part of the Valley are for motors that quit, hinges that sag on hillside lots, and panels that no longer line up after a Santa Ana wind event. We answer the phone around the clock and can usually have someone in your driveway the same day. If the gate is letting you down, call us at (760) 361-6706 and we’ll talk through what it’s doing before we ever schedule the visit.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Why Tarzana Homeowners Choose Gatewood Fence & Gate
We’re not a franchise and we’re not a call center. Gatewood Fence & Gate is owned by Hal Gatewood, who started this shop in 2001 and still shows up on job sites. That matters in Tarzana, where properties along Corbin Avenue and the streets off Burbank Boulevard run the gamut from 1950s ranch homes to gated hillside estates - each one with a different gate setup and a different failure pattern. A company flying in from outside the Valley will treat them all the same. Hal won’t.
Every job comes with our 90-Day Done Right Promise in writing. If the repair doesn’t hold, one call brings him back. No forms, no runaround. Tarzana homeowners also appreciate that a live person answers the phone 24/7. Not a voicemail, not a chatbot. Someone who knows gates picks up. And our techs are background-checked and uniformed, so the person at your gate is someone you can verify.
We work throughout Tarzana, from the flat tracts near our Reseda service area to the foothill estates south of Ventura Boulevard around Braemar Country Club. If your gate is acting up, the name on the invoice is the same name on the shop. That’s the kind of accountability people are looking for.
Gate Repair Services We Offer in Tarzana
Whatever your gate is doing - refusing to open, reversing mid-cycle, sagging into the path of the car, grinding loud enough to wake the neighbors - we handle it. Here’s what that looks like in practice.
Gate Repair
Most gate problems in Tarzana trace back to three things: heat-stressed operators, hinges that have been carrying too much weight for too long, and posts that shifted in the hillside clay. We diagnose the actual cause before we touch a part, and we weld on site rather than hauling your gate back to a shop. Learn more about our Gate Repair in Tarzana.
Gate Installation
When a gate is beyond saving, or you’re adding a gate to a driveway that’s never had one, we handle the full install. On Tarzana hillside properties, that means accounting for the slope before we ever order materials. Learn more about Gate Installation in Tarzana.
Gate Motor & Opener
Valley heat takes a toll on circuit boards, capacitors, and gearboxes, and that’s before we talk about the grade load on hillside driveways. We service LiftMaster, FAAC, BFT, and Mighty Mule, and we always check the actual slope angle before quoting a motor swap. Learn more about Gate Motor & Opener in Tarzana.
Gate Access Control
Keypads, intercoms, phone-entry systems, vehicle sensors. If the gate opens when it should and stays shut when it shouldn’t, the Gate Access Control in Tarzana is doing its job. If it isn’t, we’ll find out why.
Gate Parts & Welding
We fix what others want to replace. Wrought-iron panels on Tarzana’s older estate gates crack at the welds eventually - that’s a 20-minute on-site repair for us, not a $4,000 replacement. Hinges, rollers, chain drives, track sections, Tarzana Gate Parts & Welding, you name it.
Neighborhoods We Serve in Tarzana
We cover all Tarzana zip codes - 91356 and 91335 - and typically arrive within a short window because we’re already working in the area. That local presence means faster response than a company driving over the hill.
- The hillside estates south of Ventura Boulevard
- Braemar Country Club area
- Tarzana proper around Reseda Boulevard
- Streets between Burbank Boulevard and the 101
Why Tarzana’s Climate & Housing Affect Gate Repair
Tarzana sits in the hottest pocket of the San Fernando Valley, where summer heat regularly pushes past 100°F and the nights don’t cool off the way they do on the Westside. That sustained heat does two things to gates. First, it bakes operator circuit boards season after season until capacitors bulge and solder joints crack - usually the reason a gate works fine all winter and then dies the first week of June. Second, it degrades plastic rollers, nylon bushings, and rubber seals faster than any manufacturer’s service interval accounts for. A seal that should last eight years in a coastal climate might start crumbling in three out here.
Then there’s the housing stock. Tarzana’s flat valley floor is mostly 1950s-to-1970s ranch homes where the gate, if there is one, tends to be a retrofit - an operator someone bolted onto an existing swing gate years after the house was built. Those setups work, but they’re often undersized for the gate’s actual weight. Up in the hills south of Ventura, you’ve got custom wrought-iron and steel driveway gates on sloped drives, frequently original to 1980s and 1990s builds, and installed before anyone really thought about how grade affects motor load. We see the same failure pattern over and over on those hillside lots: mid-cycle reversals, clutch wear, and burned-out motors that were never sized for the angle they’re working against. The fix isn’t just swapping the motor - it’s recalculating the torque that slope demands.
Pricing for Gate Repair in Tarzana
Repair pricing depends on what failed, but here’s what you can expect. Hinge replacements and re-welding jobs on Tarzana’s older estate gates run roughly $180 to $400, depending on the gate’s weight. Circuit-board or capacitor failures in the motor usually land between $250 and $550 installed. A full gate-operator replacement on flat ground starts around $900 and climbs on hillside installs where the torque requirements change everything. Every quote is agreed before work starts - the price we give you on the phone is the price on the invoice. No trip charge inside the county, and we’ll take $40 off any repair over $200. Seniors and veterans get 10% off, permanently. Call (760) 361-6706 for a free estimate on your gate repair.
Service Area - Cities Near Tarzana
If you’re in Encino, Reseda, Canoga Park, or Sherman Oaks, we cover those neighborhoods too. Same owner, same crew, same 90-Day Done Right Promise. Call us and we’ll let you know when we can be there.
Serving Tarzana, CA - Our Local Coverage Area
We’re based in the Tarzana area near Encino, CA and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Tarzana
Typical repairs in Tarzana run from about $180 for a hinge or weld repair up to $1,500 or more for a full operator replacement on a steep hillside driveway. Most jobs land between $250 and $550. Every quote is agreed before any work starts, and the price doesn’t change at the door. Call (760) 361-6706 for a free estimate on yours.
Usually, yes. We’re working in Tarzana every week, and a live person answers the phone 24/7 so you’re not leaving messages and waiting. Same-day service depends on workload and part availability, but we’ll tell you honestly when we can be there. Call (760) 361-6706.
This is the classic Tarzana hillside failure. The motor and clutch were sized for flat ground, but your driveway’s slope puts extra load on the opener every time it runs. Eventually the clutch wears down, thermal sensors trip, and the gate reverses or stops mid-cycle. We check the actual slope angle and recalculate torque before quoting a motor replacement. Call (760) 361-6706 and we’ll diagnose it on site.
Most hinge, weld, and circuit-board repairs in Tarzana are done in one visit, usually an hour or two. Full operator replacements can take longer if the power run or a new foundation mount is needed. We’ll give you a time estimate when we know the details. Call (760) 361-6706 for specifics on your gate.
We fix it in your driveway. Hal welds on site and carries the parts needed for most operator brands, including LiftMaster, FAAC, BFT, and Mighty Mule. That keeps your property secure and keeps the repair quick. Call (760) 361-6706 to schedule a visit.
Santa Ana winds in Tarzana put heavy cyclical stress on exposed hillside gates, especially tall wrought-iron panels. That stress finds weak points in hinges, latch mechanisms, and the places where ornamental steel meets the gate post. Once those fail, the panel starts dragging and the operator burns itself out trying to move it. We start at the hinges and posts, not at the motor - that’s where the problem usually lives. Call (760) 361-6706 and we’ll track it down.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Tarzana and the San Fernando Valley. Hal has been repairing gates since 2001 and still answers the phone himself. Call (760) 361-6706 for a free estimate.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Tarzana Customers Say
"Beautiful gate and solid work. The build took about three weeks longer than the estimate because he was waiting on the ironwork, and I would rather have known that at the start than found out along the way."
- Beatrice Nwosu"Fitted a keypad and an intercom so my mother can let carers in without coming down the drive. He set it up and then made her practise with it until she was comfortable."
- Lucinda Marchbanks"Hundred and forty feet of cedar privacy fence, all posts set in concrete, all of it dead level on ground that is anything but. He walked the line with me twice before a single hole was dug."
- Judith Stallworth